Cisco Meraki Cloud Managed MS350 Series 24 Port Gi
$8,649.00 $14,814.00
Monday - Friday: 9:30am - 5:30pm AEST/AEDT
The HP 2530 Switch Series consists of 12 fully managed Layer 2 edge switches that deliver cost-effective, reliable, secure, and easy-to-use connectivity to business networks.
GENERAL | |
Device Type | Switch - 8 ports - Managed |
Enclosure Type | Desktop, rack-mountable, wall-mountable 1U |
Subtype | Gigabit Ethernet |
Ports | 8 x 10/100/1000 + 2 x combo Gigabit SFP |
Performance | Throughput: 14.8 Mpps Switching capacity: 20 Gbps |
Capacity | MAC addresses: 16000 |
MAC Address Table Size | 16000 entries |
Jumbo Frame Support | 9220 bytes |
Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH-2, CLI |
Encryption Algorithm | SSL |
Authentication Method | RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
Features | Flow control, DHCP support, BOOTP support, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), port mirroring, IPv6 support, half duplex mode, full duplex mode, SNTP support, sFlow, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), STP Root Guard, LLDP support, Class of Service (CoS), Generic Attribute Registration Protocol (GARP) |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3az |
Processor | 1 x ARM: 800 MHz |
RAM | 256 MB DDR3 SDRAM |
Flash Memory | 128 MB |
EXPANSION / CONNECTIVITY | |
Interfaces | 10 x 10Base-T/100Base-TX/1000Base-T - RJ-45 2 x SFP (mini-GBIC) 1 x management RJ-45 |
POWER | |
Power Device | External power adapter |
Voltage Required | AC 120/230 V (50/60 Hz) |
MISCELLANEOUS | |
Compliant Standards | FCC Class A certified, CISPR 22 Class A, CISPR 24, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, VCCI Class A ITE, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, EN 60825, CSA C22.2 No. 60950-1 |
DIMENSIONS & WEIGHT | |
Width | 25.4 cm |
Depth | 15.95 cm |
Height | 4.45 cm |
Weight | 910 g |
MANUFACTURER WARRANTY | |
Service & Support | Limited warranty - lifetime |
ENVIRONMENTAL PARAMETERS | |
Min Operating Temperature | 0 C |
Max Operating Temperature | 45 C |
Humidity Range Operating | 15 - 95% (non-condensing) |
Min Storage Temperature | -40 C |
Max Storage Temperature | 70 C |
Humidity Range Storage | 15 - 90% (non-condensing) |
SKU | J9777A |
Brand | HPE |
unified wired and wireless policies using Aruba ClearPass Policy Manager
automatically configures switch for different settings such as VLAN, CoS, PoE max power, and PoE priority when an Aruba access point is detected
defines a set of switch-based policies in areas such as security, authentication, and QoS. A user role can be assigned to a group of users or devices, using local switch configuration (YA version software only).
Quality of Service (QoS)
allows real-time traffic classification with support for eight priority levels mapped to either two or four queues, and uses weighted deficit round robin (WDRR) or strict priority
prioritizes traffic by specifying a port and priority level
prioritizes traffic by specifying a VLAN and priority level
sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
establishes per-port ingress-enforced maximums for all ingressed traffic or for broadcast, multicast, or unknown destination traffic
enables prioritization based on TCP/UDP port numbers
helps deliver reliable communication during full-duplex operation
Overview
allows configuration of the switch from any Web browser
provides advanced configuration and diagnostics
allows the switch to be managed with a variety of third-party network management applications
supports both cloud-based Central and on-premise AirWave with the same hardware ensuring change management platform without ripping and replacing switching infrastructure
provides single IP address management for up to 16 switches
delivers wire-speed traffic accounting and monitoring, configured by SNMP and CLI with three terminal encrypted receivers
automates device discovery protocol for easy mapping by network management applications
provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log throttling and log filtering to reduce the number of log events generated
allows traffic to be mirrored on any port or a network analyzer to assist with diagnostics or detecting network attacks
provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
finds and fixes common network problems automatically, and then informs the administrator
allows assignment of descriptive names to ports
provides independent primary and secondary operating system files for backup while upgrading
are easily stored with a flash image
allows users to set the locator LED on a specific switch to turn on, blink, or turn off; and simplifies troubleshooting by making it easy to locate a particular switch within a rack of similar switches
provides an at-a-glance view of the status, activity, speed, and full-duplex operation
display issues, if any
adds the option to specify the location of switch software via DHCP
enables zero-touch configuration for switches
uses settings in DHCP to enable ZTP with Aruba AirWave
allows the switch to be deployed and managed at the edge of an IPv6 network
supports connectivity for both protocols; provides a transition mechanism from IPv4 to IPv6
forwards IPv6 multicast traffic to appropriate interface; prevents IPv6 multicast traffic from flooding the network
supports ACL & QoS for IPv6 network traffic on Gigabit & 48 port 10/100 models
RA Guard, DHCPv6 Protection, Dynamic IPv6 Lockdown (YA only)
provides up to 30 W per port that allows support of the latest PoE+ capable devices such as IP phones, wireless access points, and security cameras, as well as any IEEE 802.3af compliant end device; eliminates the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments
adjusts automatically for straight-through or crossover cables on all ports
detects and provides power to pre-standard PoE devices
provides fiber connectivity such as Gigabit-SX, -LX, -LH, and -BX with four SFP slots on all 24- and 48-port Gigabit Ethernet models. Fast Ethernet 24- and 48-port models have two SFP slots and two RJ-45 Gigabit uplinks; 8-port models have two dual-personality ports supporting either SFP or RJ-45 Gigabit uplinks
gives easy access to switch CLI with front-of-switch location and the flexibility of using either an RJ-45 or USB micro-B serial console port
provides support for 512 VLANs and 4,094 VLAN IDs
supports up to 9,220-byte frame size to improve the performance of large data transfers; 8- and 24-port Fast Ethernet models automatically support up to 2,000-byte frames with no configuration needed
provides access to many Layer 2 devices
allows automatic learning and dynamic assignment of VLANs
allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+
accommodates IPv4/IPv6 port and VLAN-based ACLs (IPv6 ACL is supported only on Gigabit Ethernet and 48-port models.)
allows only specified ports to communicate with each other
eases switch management security administration by using a password authentication server
encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
allows access only to specified MAC addresses, which can be learned or specified by the administrator
prevents particular configured MAC addresses from connecting to the network
uses an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server to authenticate in accordance with industry standards
provides a browser-based environment, similar to IEEE 802.1X, to authenticate clients that do not support the IEEE 802.1X supplicant
authenticates the client with the RADIUS server based on the client's MAC address
encrypts all transmitted data for secure remote CLI access over IP networks
encrypts all transmitted data for secure remote CLI access over IP networks
blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
protects the root bridge from malicious attacks or configuration mistakes
delivers secure encryption of all access methods (CLI, GUI, or MIB) through SSHv2 and SNMPv3
displays security policy when users log in to the switch
allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file
offers intuitive CLI to configure the source-port filter feature, by allowing specified ports to be isolated from all other ports on the switch; the protected port or ports can communicate only with the uplink or shared resources
provides authentication for up to eight IEEE 802.1X users per port; prevents a user from "piggybacking" on another user's IEEE 802.1X authentication
allows a switch port to accept any IEEE 802.1X and either Web or MAC authentications
helps secure switch CLI logon by optionally requiring either RADIUS or TACACS+ authentication
blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address spoofing
allows non-chatty legacy devices to stay authenticated by pinning client MAC addresses to the port until the clients logoff or get disconnected
defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones
prevents flooding of IP multicast traffic
facilitates easy mapping using network management applications with LLDP automated device discovery protocol
support multiple methods—automatic, IEEE 802.3at dynamic, LLDP-MED fine grain, IEEE 802.3af device class, or user specified—to allocate and manage PoE/PoE+ power for more efficient energy use
uses LLDP-MED to automatically configure a VLAN for IP phones
prevents flooding of IP multicast traffic
receives and recognizes CDP packets from Cisco's IP phones for seamless interoperation
assigns attributes such as VLAN and QoS using locally configured profile that can be a list of MAC prefixes
supports up to eight links per trunk to increase bandwidth and create redundant connections; and supports L2, L3, and L4 trunk load-balancing algorithm (L4 trunk load balancing is supported only on Gigabit Ethernet and 48-port models.)
eases configuration of trunks through automatic configuration
provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w
provides easy-to-configure link redundancy of active and standby links
reduces power consumption during periods of low data activity on Gigabit Ethernet switches
enables the port to automatically go into low-power mode to conserve energy when no link is detected
decreases power consumption in fanless (all 8-port, 2530-24, and 2530-48 PoE+ switches) as well as variable- speed fan switches
conserves energy by optionally turning off port link and activity LEDs
provides a highly integrated, high-performance switch design with a non-blocking architecture
allows the switch to be mounted on a standard 19-inch rack, with the hardware included
allows the switch to be mounted on a wall, using the hardware included
allows the switch to be mounted above or below a surface (such as a desk or table), using the hardware included
lowers noise, making it suitable for deployments in acoustically sensitive environments such as conference rooms and office spaces
reduces space requirements (refer to the product specifications for the exact dimensions)
Overview
see http://www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase.
to find software for your product, refer to http://www.hpe.com/networking/support; for details on the software releases available with your product purchase, refer to http://www.hpe.com/networking/warrantysummary
Lifetime Manufacturer Warranty
Help other KS Computer Technology Pty Ltd users shop smarter by writing reviews for products you have purchased.
$8,649.00 $14,814.00
$25.00 $39.00
$17,308.00 $29,648.00
$168.00 $329.00
$1,268.00 $2,172.00
$1,632.00 $3,149.00
$292.00 $565.00
$162.00 $234.00