Output

• Output power capacity
  480Watts / 950VA
• Max Configurable Power (Watts)
  480Watts / 950VA
• Nominal Output Voltage
  230V
• Output Frequency (sync to mains)
  50/60 Hz +/-1 Hz
• Output Frequency (not synced)
  50/60 Hz +/-1 Hz
• Topology
  Line Interactive
• Waveform type
  Stepped approximation to a sinewave
• Output Connections
  (6) Australian (Battery Backup)
• Transfer Time
  8ms typical : 10 ms maximum

Input

• Nominal Input Voltage
  230V
• Input frequency
  50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections
  Australian/Chinese
• Cord Length
  1.22meters
• Input voltage range for main operations
  150 - 280 V
• Number of Power Cords
  1
• Maximum Input Current
  4.0A
• Input Power Factor at Full Load
  0.51

Batteries & Runtime

• Battery type
  Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Included Battery Modules
  1
• Typical recharge time
  8hour(s)
• Expected Battery Life (years)
  2 - 5
• Battery Volt-Amp-Hour Capacity
  76
• Runtime
  View Runtime Graph
  View Runtime Chart
• Efficiency
  View Efficiency Graph

Communications & Management

• Interface Port(s)
  USB
• Control panel
  LED status display with On Line : On Battery : Replace Battery and Overload indicators
• Audible Alarm
  Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

• Surge energy rating
  273Joules
• Data Line Protection
  RJ-11 Modem/Fax protection

Physical

• Maximum Height
  215mm , 21.5cm
• Maximum Width
  130mm , 13.0cm
• Maximum Depth
  336mm , 33.6cm
• Net Weight
  8.0kg
• Shipping weight
  8.99kg
• Shipping Height
  295mm , 29.5cm
• Shipping Width
  245mm , 24.5cm
• Shipping Depth
  440mm , 44.0cm
• Color
  Black

Environmental

• Operating Environment
  0 - 40 °C
• Operating Relative Humidity
  0 - 95% no %
• Operating Elevation
  0-3000meters
• Storage Temperature
  -15 - 40 °C
• Storage Relative Humidity
  0 - 95% no %
• Storage Elevation
  0-9000meters
• Audible noise at 1 meter from surface of unit
  45.0dBA

Conformance

• Approvals
  A-tick, C-tick, CE, IEC 62040-1-1, RCM, Telepermit
• Standard warranty
  2 years repair or replace

Sustainable Offer Status

• RoHS
  Compliant
• REACH
  REACH: Contains No SVHCs

BX950U-AZFeatures

APC Back-UPS 950VA, 230V, AVR, Australian Sockets

Battery Backup & Surge Protector for Electronics and Computers

Includes : USB cable , User Manual

• Automatic restart of loads after UPS shutdown
  Automatically starts up the connected equipment upon the return of utility power.
• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Automatic Voltage Regulation (AVR)
  Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
• Resettable circuit breaker
  Easy recovery from overloads; no need to replace a fuse.
• Telephone dataline surge protection
  Provides protection of connected equipment from power surges traveling on telephone lines.
• USB connection
  Use your PC to access additional power protection and management features for your UPS via a USB Port.

Back-UPSFeatures & Benefits

Manageability

• LED status display
  Quickly understand unit and power status with visual indicators.
• Audible alarms
  Provides notification of changing utility power and UPS power conditions

Safety

• Safety-agency approved
  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Protection

• Battery and surge protected outlets
  Back up and protect your hardware and data during power outages, surges and spikes.
• Surge only outlets
  Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Availability

• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Battery failure notification
  Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Marketing Features

• Battery-protected and surge-only outlets
  Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Be The First To Review This Product!

Help other KS Computer Technology Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review